FORMULATION
|
DESCRIPTION |
ROYSON FC
|
AGGRESSIVE CUTTING TUMBLING MEDIA. PERFORMS WELL ON ALL
METALS. QUICK BURR REMOVAL OF LARGE BURRS ON FERROUS AND
STAINLESS STEEL. FAST CUTTING WITH A GOOD WEAR RATE.
90 LBS. PER CUBIC FOOT.
|
ROYSON MC
|
MEDIUM CUTTING TUMBLING MEDIA. PERFORMS WELL ON ALL METALS.
GOOD CUTTING ACTION AND A LONG WEAR LIFE. LEAVES PART WITH
CLEAN MATTE FINISH.
90 LBS. PER CUBIC FOOT.
|
ROYSON MFC |
GOOD CUTTING ACTION AND LONG WEAR LIFE, WORKS WELL IN A
VARIETY OF DEBURRING, DEFLASHING, AND RADIUSING APLICATIONS.
CAN BE USED FOR BURNISHING PARTS.
90 LBS. PER CUBIC FOOT.
|
ROYSON LC |
LIGHT CUTTING ACTION AND VERY LONG WEAR LIFE. REMOVES SHARP
EDGES AND CORNER POINTS. LEAVES PART WITH A CLEAN BRIGHT
FINISH. EXCELLENT OF BURNISHING PARTS.
90 LBS. PER CUBIC FOOT.
|
ROYSON P |
NON ABRASIVE MEDIA WITH A PORCELAIN BODY. EXCELLENT FOR
BURNISHING. LEAVES PART WITH A CLEAN BRIGHT FINISH. FOR
BURNISHING, POLISHING, ELIMINATES SHARP EDGES.
90 LBS. PER CUBIC FOOT.
|
ROYSON LW |
LIGHT WEIGHT CERAMIC MEDIA USED WHEN THE HIGHER DENSITY OF
REGULAR CERAMIC MEDIA WILL BEND OR WARP A PART. GOOD
CUTTING ACTION. LEAVES PART WITH A GOOD FINISH.
65 LBS. PER CUBIC FOOT.
|
ROYSON SC |
A SILICON CARBIDE BASED FORMULATION CONTAINING NO ALUMINUM
OXIDE. GOOD CUTTING ACTION WITH A LONG LIFE. RECOMMENDED
FOR PARTS THAT CAN NOT HAVE ANY ALUMINUM OXIDE IMPREGNATION.
95 LBS PER CUBIC FOOT.
|
ROYSON HDP |
A NON ABRASIVE, HIGH DENSITY FORMULATION USED FOR
BURNISHING AND BRIGHTENING PARTS. VERY LONG LASTING.
REQUIRES A BREAK IN PERIOD FOR BEST FINISHES. USED FOR
MICROSURFACING.
120 LBS. PER CUBIC FOOT.
|
ROYSON HDC |
A HIGH DENSITY FORMULATION USED FOR BURR REMOVAL AND
IMPROVEMENT OF SURFACE FINISH. GOOD WEAR RATE. LEAVES
THE PART WITH SMOOTH BRIGHT SURFACE.
130 LBS. PER CUBIC FOOT
|
