Liquid Compound Systems
|
| Liquid Compound Dispensing Systems are available to meet all systems requirements. Simple pumping and recirculating systems to multi pump systems are available. Precise delivery of water and compounds into the finishing process is achieved with these systems. |
|
This is the standard compound pump used on most Royson machines.
The pump is bolted to the side of the machine control panel stand.
Tubing is supplied to draw compound from a pail or drum and to deliver compound
to the machine. A switch on the control panel turns the pump on and off.
|
|
STANDARD PUMP
|
|
|
This pump system is used when multiple compound and water rinses are required
for the finishing process. The system allows manual and automatic operation
with timed cycles. All tubing is supplied with the pump. The system is powered by 120 Volt. |
MULTI-STAGE PUMP
|
|
|
The flow meter is attached to the side of the machine control panel stand.
A 0-20 or 0-40 gph flow meter regulates water flow to the machine.
A solenoid valve opens and closes the water line when the standard pump
is turned on and off. A standard water line must be connected to the system.
Tubing from the meter to the machine is supplied. |
WATER FLOW METER
|
|
|
This unit is used for recirculating compound solution into the vibratory machine.
- Submersible pump,valve assembly and 10' tubing
|
RC 500 PUMP
|
|
RC 2000 PUMP
|
This system automatically mixes and dispenses very accurate amounts of compound solution into the vibratory machine.
|
